The X-Spat Patchbay window
The X-Spat Patch-bay window allows you to connect the system' s inputs and outputs and to send the desired setups through the button OK.
As in the main window, each button marked by a number activates the group of parameters corresponding to the channels marked with the same number. A red LED visualizes the activated connection.
The first column shows a list of the available inputs for each channel. The second is made up of as many pop-up menus, which allow you to select the output to which you want to connect the input to the left of the menu. If necessary, another pop-up menu will be available to allow you to choose the output number. In this way, for instance, with channel 1 having been selected, the ‘Spatializer In 1’ can be connected to any of the ‘Host Out’s, from 1 to 8. When opening ‘X-Spat Controller’, the patch-bay and all the other parameters are set at default value. Closing the X-Spat Patch-bay window and consequently sending the changes to the set-up, will modify the status of the card, with results that are totally dependant on your actions.
In case of problems, we advice you to open one of the many default configurations that can be found in the installation CD ROM of the software.